F4 V5 PRO Skrydžio Kontroleris su OSD – COLORMIX

28.18

F4 V5 PRO Skrydžio Kontroleris su OSD – COLORMIX
5V 3A BEC / Current Sensor / 5.8GHz 40CH 25mW 200mW 600mW FPV Transmitter

DAUGIAU INFORMACIJOS

Aprašymas

F4 V5 PRO Skrydžio Kontroleris su OSD – COLORMIX
F4 V5 PRO is integrated with 5.8GHz 40CH video transmitter whose output power can be switched among 0 / 25mW / 200mW / 600mW. It has BetaFlight OSD and allows you to tune PID directly via your transmitter. The flight controller can be connected to 2 – 6S LiPo and support 200A maximum current. The built-in BetaFlight OSD and compatibility with BLHeli – S enable you to take advantages of the latest DShot protocol and much more accurate control.

Main Features:
● Advanced STM32F405RGT6 processor, onboard 16MB flash for flight data logging
● MPU6000 connected via SPI, high-speed data sampling
● BetaFlight OSD designed for tuning PID via transmitter
● Integrated with current sensor and 5V 3A BEC
● 5.8GHz 40CH VTX, 0 / 25mW / 200mW / 600mW adjustable power
● 4 x 3oz copper PCB supports 2 – 6S LiPo and up to 200A current
● Compatible with mainstream receivers, such as SBUS / PPM / DSMX receivers etc.
● Supports buzzer, LED strip, voltage monitoring, and BLHeli – S ESC programming

Specifications:
Processor: STM32F405RGT6
IMU: MPU6000
Firmware: BetaFlight
Power supply: 2 – 6S LiPo
Max. current support: 200A
BEC output: 5V 3A
Mounting hole spacing: 30.5 x 30.5mm
Video transmitter frequency: 5.8GHz
Channels: 40 ( including RaceBand, Band E )
Output power: 0 / 25mW / 200mW / 600mW
Antenna adapter: with RP-SMA female connector

F4 V5 PRO Skrydžio Kontroleris su OSD – COLORMIX

Atsiliepimai

Atsiliepimų dar nėra.

Būkite pirmas aprašęs “F4 V5 PRO Skrydžio Kontroleris su OSD – COLORMIX”

El. pašto adresas nebus skelbiamas. Būtini laukeliai pažymėti *